阴离子表面活性剂聚二硫二丙烷磺酸钠的合成

利用硫化钠与硫磺反应制备二硫化钠,然后将二硫化钠与1,3-丙磺酸内酯反应,合成了一种可作为电镀添加剂的阴离子表面活性剂——聚二硫二丙烷磺酸钠(SPS)。采用核磁共振氢谱对合成产物进行结构表征,确认了产物结构及产率。通过正交试验研究了产物产率与反应物配比、反应温度、溶剂加入量等因素之间的关系,找出了最优合成条件:第一步合成二硫化钠的反应中,硫化钠/硫磺物质的量比为1∶1.3,温度55℃,加水量18 mL;第二步合成SPS的反应中,1,3-丙磺酸内酯/硫化钠物质的量比为1.7∶1,温度40℃,溶剂量75 mL,产物的最高产率可达到95.8%。     

Impact of Matrix Metalloproteinase-9 during Periodontitis and Cardiovascular Diseases

Matrix metalloproteinase-9 (MMP-9) has been shown to play a key role in endothelial function and perhaps pivotal in the correlation between periodontal disease and cardiovascular disease (CVD). For the study, the impact of MMP-9 of periodontitis and CVD on serum and saliva concentrations was analyzed. For the study patients with periodontitis (n = 31), CVD (n = 31), periodontitis + CVD (n = 31), and healthy patients (n = 31) were enrolled. Clinical and demographic characteristics as well as serum and salivary MMP-9 were evaluated. MMP-9 concentrations in serum and saliva were statistically elevated in patients with CVD (p < 0.01) and in patients with periodontitis plus CVD (p < 0.001) compared to patients with periodontitis and healthy subjects. Multivariate regression analysis showed that c-reactive protein (hs-CRP) was the only significant predictor for MMP-9 serum (p < 0.001), whereas hs-CRP (p < 0.001) and total cholesterol (p = 0.029) were the statistically significant salivary MMP-9 predictors. This study evidenced that patients with CVD and periodontitis + CVD presented elevated MMP-9 concentrations in serum and saliva compared to patients with periodontitis and healthy subjects. Furthermore, hs-CRP was a negative predictor of serum and salivary MMP-9.     

“蓝瓶子”实验再探究*

利用SPSS 25.0统计软件对“蓝瓶子”实验进行正交实验设计,通过统计学分析得出最佳实验条件。利用氧化还原传感器(ORP)对“蓝瓶子”振荡体系的电极电势变化曲线进行分析,并针对蓝色的产生和消失过程设计3组对比实验深入探究,阐明其反应原理,意在引导学生深刻理解趣味实验现象背后的微观反应本质。     

确定性矩阵可分离压缩成像

针对可分离压缩传感使用的可分离随机正交矩阵在处理大尺度图像等高维信号感知时难度太大或成本过高的问题,引入确定性测量矩阵,提出确定性矩阵可分离压缩传感,可将如托普利兹矩阵及循环矩阵等具有确定性结构的矩阵作为可分离压缩传感的左、右可分离矩阵.该方案可以降低独立元素的数目,从而显著降低前端物理实现的难度与成本.数值模拟实验分别评估了该方法在不同采样率及不同图像尺寸下的压缩重建性能,结果表明该方法在独立元素非常少的情形下得到与原随机正交矩阵相近的重建质量,证明了其可行性.     

A Three‐Factor Product Construction for Mutually Orthogonal Latin Squares

It is well known that mutually orthogonal latin squares, or MOLS, admit a (Kronecker) product construction. We show that, under mild conditions, “triple products” of MOLS can result in a gain of one square. In terms of transversal designs, the technique is to use a construction of Rolf Rees twice: once to obtain a coarse resolution of the blocks after one product, and next to reorganize classes and resolve the blocks of the second product. As consequences, we report a few improvements to the MOLS table and obtain a slight strengthening of the famous theorem of MacNeish.     

Research on improving the accuracy of near infrared non-invasive hemoglobin detection

To optimize the accuracy of near-infrared non-invasive hemoglobin (Hb) clinical detection, high-performance instrument and prepossessing algorithm have been investigated. A near-infrared spectrophotometric system was constructed adopting InGaAs detector array with 16 pixels and plane grating spectrometer to obtain high signal noise ratio (SNR) spectral data. In our experiment, we applied the device independently to collect spectra data from 91 volunteers’ fingertips non-invasively. Two prediction tests were conducted to verify the effects of preprocessing algorithms improving the accuracy of near-infrared Hb detection and exclude the occasionality of satisfactory results in a single trial. Our non-invasive Hb detection methods were based on partial least squares (PLS). In each test, PLS, MSC coupled with PLS, DOSC coupled with PLS, three methods for non-invasive Hb detection, were analyzed respectively. The results of two trials showed that only DOSC & PLS performed excellently in both predictive ability and stability, obviously better than other two methods. Relative RMSEP was 6.16% in predicting test 1, 6.08% in predicting test 2, almost reaching the requirements of clinical application. It indicates that our independent-developed high-performance instrument and the method DOSC coupled with PLS are promising in non-invasive Hb detection clinical application.     

Free vibration of non-uniform nanobeams using Rayleigh–Ritz method

In this article, boundary characteristic orthogonal polynomials have been implemented in the Rayleigh–Ritz method to investigate free vibration of non-uniform Euler–Bernoulli nanobeams based on nonlocal elasticity theory. Non-uniform cross section of nanobeams has been considered by taking linear as well as quadratic variations of Young's modulus and density along the space coordinate. Detailed analysis has been reported for all the possible cases of such variations. The objective of the present study is to analyze the effects of nonlocal parameter, boundary condition, length-to-diameter ratio and non-uniform parameter on the frequency parameters. It is found that clamped nanobeams are having highest frequency parameters than other types of boundary conditions for a particular set of parameters. It is also observed that frequency parameters decrease with increase in scaling effect parameter. First four deflection shapes of non-uniform nanobeams have also been incorporated. In this analysis, some of the new results in terms of boundary conditions have also been included.     

氨基的脱保护——乙酰苯胺水解实验教学设计*

通过开放性设计实验完成氨基脱保护实验的教学。指导学生以回收的乙酰苯胺为原料,自主设计乙酰苯胺在酸、碱条件下水解正交实验方案并分组独立操作,制备并提纯苯胺,比较不同条件下的苯胺收率,筛选出乙酰苯胺最佳的水解条件。对所选实验班级近3年的实验结果进行统计和分析,并通过验证实验考察了结果的可重复性。     

Orthogonal Cationic and Radical RAFT Polymerizations to Prepare Bottlebrush Polymers

An orthogonal combination of cationic and radical RAFT polymerizations is used to synthesize bottlebrush polymers using two distinct RAFT agents. Selective consumption of the first RAFT agent is used to control the cationic RAFT polymerization of a vinyl ether monomer bearing a secondary dormant RAFT agent, which subsequently allows side‐chain polymers to be grafted from the pendant RAFT agent by a radical‐mediated RAFT polymerization of a different monomer, thus completing the synthesis of bottlebrush polymers. The high efficiency and selectivity of the cationic and radical RAFT polymerizations allow both polymerizations to be conducted in one‐pot tandem without intermediate purification.     

Influence of the molding angle on tensile properties of FDM parts with orthogonal layering

Fused deposition molding (FDM) is one of the most widely used three‐dimensional (3D) printing technologies. This paper explores the influence of the forming angle on the tensile properties of FDM specimens. Orthogonal layering details were studied through experiments, theory, and finite element simulations. The stiffness and strength of the specimens were analyzed using the classical laminated plate theory and the Tsai–Wu failure criterion. The experimental process was simulated using finite element simulations. Results show that it is feasible to predict the stiffness and strength of FDM specimens using classical laminated plate theory and the Tsai–Wu failure criterion. A molding angle of 45° leads to specimens with maximized tensile properties. Numerical simulations show that changing the molding angle changes the internal stress and deformation fields inside samples, leading to FDM samples with different mechanical properties due to the orthogonal layers at different molding angles.